Showing posts with label display. Show all posts
Showing posts with label display. Show all posts

Sunday, December 22, 2013

Running Message Display Schematics Circuit

- 0 comments

Light emitting diodes are advantageous due to their smaller size, low current consumption and catchy colours they emit. Here is a running message display circuit wherein the letters formed by LED arrangement light up progressively. Once all the letters of the message have been lit up, the circuit gets reset. The circuit is built around Johnson decade counter CD4017BC (IC2). One of the IC CD4017BE’s features is its provision of ten fully decoded outputs, making the IC ideal for use in a whole range of sequencing operations.In the circuit only one of the outputs remains high and the other outputs switch to high state successively on the arrival of each clock pulse.

Circuit diagram :

Running Message Display -Circuit diagram

Running Message Display Circuit Diagram

The timer NE555 (IC1) is wired as a 1Hz astable multivibrator which clocks the IC2 for sequencing operations. On reset, output pin 3 goes high and drives transistor T7 to ‘on’ state. The output of transistor T7 is connected to letter ‘W’ of the LED word array (all LEDs of letter array are connected in parallel) and thus letter ‘W’ is illuminated. On arrival of first clock pulse, pin 3 goes low and pin 2 goes high. Transistor T6 conducts and letter ‘E’ lights up. The preceding letter ‘W’ also remains lighted because of forward biasing of transistor T7 via diode D21. In a similar fashion, on the arrival of each successive pulse, the other letters of the display are also illuminated and finally the complete word becomes visible. On the following clock pulse, pin 6 goes to logic 1 and resets the circuit, and the sequence repeats itself. The frequency of sequencing operations is controlled with the help of potmeter VR1.


The display can be fixed on a veroboard of suitable size and connected to ground of a common supply (of 6V to 9V) while the anodes of LEDs are to be connected to emitters of transistors T1 through T7 as shown in the circuit. The above circuit is very versatile and can be wired with a large number of LEDs to make an LED fashion jewellery of any design. With two circuits connected in a similar fashion, multiplexing of LEDs can be done to give a moving display effect

[Continue reading...]

Wednesday, June 12, 2013

China mobile GSM phone white display solution

- 0 comments
Welcome to the mobile phone repairing tips blog.This is my farts  post on blog.my name is Rizwan Naz and i am a mobile repairing expert.My blog is all about the mobile phone;s software and hardware solution.Whenever you will visit my blog you will find the all solution of your any kind of cell phone.Here you can find all the cell phone repairing tips,applications,software,blackberry software information,nokia  mobile phone all models china all models solution.Today china mobile phone is very famous around the world but some time it create a problem white screen.It held after few second and became white display.There tow reason first your mobile phone put down on the floor and second your mobile phone water damage.
china mobile have many models but hardware have same software different.This picture have a one china mobile phone bored and seven IC;s same IC small and three main IC big and big one UUP IC and second REM thread is power IC.

Electronics Circuit Application

If you china mobile phone create a problem white display.
First of all you open a mobile with sample  mobile phone tools and put the mobile phone bored same  this picture and rehot the UUP IC.Then your china mobile phone problem 100% solve.
If you like my blog and you want to know about the cell phone repairing tips.please give me your comments. Electronics Circuit Application
[Continue reading...]

Nokia N91 Phone white display Solution

- 0 comments
Nokia n91 is s very nice mobile phone but some time its create a different problem with display or LCD.Some time when you mobile on its not show the any display on the lcd or LCD show white.If its show the display blank(no lights and no display) so its mean your mobile phones LCD is damage then you open the mobile phone with mobile phone tools and replace the LCD.If its show the only white  and no display then may be your mobile Phone LCD is OK but display IC is damage.So replace the LCD with new one.If your mobile phone problem not solved then you then you replace the display ic.Display Ic i show you below picture.
These problem is same
Nokia n91 blank display .
 Nokia n91display problem.
 Nokia n91 display jumper.
 Nokia n91 no display.
 Nokia n91 white display.
You May Like To Read Also!

 

Electronics Circuit Application


 
[Continue reading...]
 
Copyright © 2012. Fast Diagrams - Posts · Comments
Powered by Blogger