Simple Power Pulse Using by LM350 and NE555 Circuit Diagram

This is a Simple Power Pulse Using by LM350 and NE555 Circuit Diagram. This circuit can use to drive lamp,power LED,DC motor etc. Adjust R5 for output amplitude.Adjust R1 for output power .

Power Pulse Circuit Diagram

The LM350 is adjustable 3-terminal positive voltage regulators is capable of supplying in excess of 3A over a 1.2V to 33V output range.This circuit requires 5-15V power supply.

[Continue reading...]

Build a Stand by Power Circuit Diagram for Non Volatile Cmos Rams

This is  a simple Stand by Power Circuit diagram for Non Volatile Cmos Rams. To prevent loss of data when a CMOS RAM is switched from normal operation (Vcc = 5 volts) to stand-by mode (Vcc = VBAT) it must be ensured that the CS pin goes near the Vcc rail at all times. 

Ac coupling to the chip select is made through capacitor C, breaking the dc current path between Vqq (and hence VBAT) and the decoder output. So, whatever the impedance state of the decoder in power down, the battery will provide current only for the RAM, low enough to keep the voltage at CS near to V^.

Power Circuit Diagram

[Continue reading...]